江蘇遇水止水帶規格

網消息：昨天，環保部公布了今年前8月主要城市空氣狀況，同時公布了空氣較差的10個城市。

橡膠止水帶是采用天然橡膠與各種合成橡膠為主要原料，摻加各種助劑及填充料，經塑煉，混煉， 壓制成型，其品種規格較多，有橋型、山型、P型、R型、U型、Z型、乙型、T型、H型、E型、Q型等。

江蘇遇水止水帶規格
The rubber sealing strip is made of natural rubber and various synthetic rubber as the main raw material, and the filling material mixed with various additives, through mixing, mixing, molding, the more varieties of different specifications, bridge, mountain type, P type, R type, U type, Z type, T type, H type, type, E type and Q type etc..

江蘇遇水止水帶規格
該止水材料具有良好的彈性，耐磨性、耐老化性和抗性能，適應變形能力強、防水性能好，溫度使用范圍-45℃-+60℃。當溫度超過+70℃，以及強烈的氧化作用或受油類等侵蝕時，均不得使用該產品。

The sealing material has good elasticity, wear resistance, aging resistance and tear resistance. It has good deformation ability and good waterproof performance. Its temperature range is -45 degrees centigrade and -+60 degrees centigrade. This product should not be used when the temperature is higher than +70 degrees, and it is strongly oxidized or eroded by organic solvents such as oil.

江蘇遇水止水帶規格

可竟然被人培育的如此難以對付。
按型號可分為：CB型橡膠止水帶（埋入式中間有孔型）；CP型橡膠止水帶（埋入式中間無孔型）；EB型橡膠止水帶（外貼式中間有孔型）；EP型橡膠止水帶（外貼式中間無孔型）。
According to the models can be divided into: CB type rubber zhishuidai (submerged middle p); CP type rubber sealing belt (embedded in the middle of groovless); EB type rubber sealing belt (outside attached middle p); EP type rubber sealing belt (t type middle p free).

按材質可分為：天然橡膠止水帶，氯丁橡膠止水帶，三元乙丙橡膠止水帶。
According to the material can be divided into: natural rubber waterproof belt, chloroprene rubber waterproof belt, three yuan ethylene propylene rubber water stop belt.
按使用情況可分為：中埋式橡膠止水帶和背貼式橡膠止水帶(外貼式橡膠止水帶)、鋼邊橡膠止水帶、遇水橡膠止水帶、平板式止水帶

江蘇遇水止水帶規格
According to the use situation can be divided into: buried rubber water stop and back affixed rubber waterproof tape (external rubber sealing tape), steel edge rubber water stop, water swelling rubber water stop, flat type water stop belt
橡膠止水帶主要用于混凝土現澆時設在施工縫及變形縫內與混凝土結構成為一體的基礎工程，如地下設施、涵洞、輸水渡槽、攔水壩、貯液構筑物等。
江蘇遇水止水帶規格

The rubber sealing belt is mainly used for cast-in-place concrete when in construction joints and deformation joints and concrete structure has become one of the basic engineering facilities, such as tunnels, culverts, dams, aqueducts, liquid storage structures etc..

下一篇：